The proportion of lamps in the hotel is not small. On the selection of hotel lamps, which factors should be considered first?
No matter what level of other hotel is a long-term investment, and profit recovery of a longer project, so the time is the first consideration. The hotel’s service to its customers is centered on care, so the customer’s impact on repairs or day-to-day operations will be reduced to a minimum, so durability and flexibility are another consideration. The details of lighting fixture selection, as well as the lighting index are also an important consideration.
1. Timeliness, durability
A typical hotel may require a small, innovative repair in about five years, and may require a major renovation during the decade. In other words, the lamp's life must be at least ten years or more before it can satisfy the requirements of the hotel.
In the case of small repairs, the lamps are generally not replaced. This means that in the lamp selection, the most heated and pressurized parts of the lamp include reflector cups, heat sinks, and the quality of the fixing (positioning) components. is very important.
The light source chosen by the hotel has a life of approximately 2000 to 4000 hours. Therefore, the lamps will require replacement of many times the light source in the 10 years. The number of star-rated hotels has exceeded tens of thousands, so replacing the light source involves a huge amount of human resources, so the flexibility of the lamps is another consideration. The most ideal lamp selection is to be able to handle the light source without having to touch the fixed (positioning) component of the lamp. This not only saves replacement time, but also makes a very positive maintenance of interior decoration.
3. Detail modeling
As mentioned earlier, if the hotel can express its style and grace, it is the success of the interior design, but the details of the lighting model are also very important. This includes all aspects of the lamp itself, for example: Take a typical ceiling lamp for example, the spray quality of its tricone (if it is metal, how the surface quality), the smoothness of the reflector, ( Such as frosted reflector cups, sandblasting evenness), we need to pay attention to the details of the joints with the ceiling (gypsum board/wood veneer) after the ceiling is installed (with no light leakage).